Glass Cleaners
Incoming module glass needs controlled preparation matched to surface condition, washing method and downstream lay-up.
IPA & Specialty Solvents
SOLARPRO XYL-100
Residue-specific cleaning and preparation in module manufacturing
Operating / process challenges
Preparation and cleaning decisions change across module assembly.
Everklin Living Process Platform
Solar module assembly process
Inspect the connected module route from stringing and glass preparation through lay-up, lamination, framing, sealant work and final inspection.
System overviewIncoming glass surface condition before lay-up
Select any numbered process point to inspect its operating challenge and treatment context.
Process stages
Monitoring referencesNo live plant values are shown.
Surface ConditionResidue TypeMaterial CompatibilityApplication MethodDrying RequirementFinal Inspection
Choose by task + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
XYL-100
IPA & Specialty Solvents
SOLARPRO XYL-100
SolarPro XYL-100 is part of Everklin's Solar Module Manufacturing Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.Residue-specific cleaning and preparation in module manufacturing
Used forVerified solar manufacturing or installed-panel surfaces
- Primary application
- Verified solar manufacturing or installed-panel surfaces
- Process / cleaning stage
- IPA & Specialty Solvents
- Target soil / requirement
- Oil, adhesive, flux or process residue requiring a validated solvent route
- Application method
- Use only in approved process stage with substrate compatibility and rinse/finish controls
- Product role
- SolarPro XYL-100 is part of Everklin's Solar Module Manufacturing Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Commercial pack
- 25 L
Selected product
Product Overview
Technical Information
At a glance
SolarPro XYL-100 is positioned within Everklin's Solar Module Manufacturing portfolio for solar-process cleaning / surface care. Selection should be based on the actual soil or process condition, surface/equipment compatibility, application method and the approved site procedure rather than product name alone.
Use this route when the operating requirement matches solar-process cleaning / surface care and the observed condition is consistent with stage-specific residue or surface condition.
SolarPro XYL-100 is part of Everklin's Solar Module Manufacturing Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
IPA & Specialty Solvents
Use this route when the operating requirement matches solar-process cleaning / surface care and the observed condition is consistent with stage-specific residue or surface condition.
Use only in approved process stage with substrate compatibility and rinse/finish controls
Oil, adhesive, flux or process residue requiring a validated solvent route
Verified solar manufacturing or installed-panel surfaces
Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
25 L
Problems this product can help address
- Stage-specific residue or surface condition
- Product
- XYL-100
- Chemistry / format
- Specialty process solvent
- Application
- Use only in approved process stage with substrate compatibility and rinse/finish controls
- Technical values
- Refer to the current approved TDS
Benefits & applications
Applications
- Verified solar manufacturing or installed-panel surfaces
- Tooling clean-down
- Application-specific surface preparation
- Rework and maintenance cleaning
How the result should be verified
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
How to use
Final values remain subject to the current Everklin TDS and site validation.
Dilution / dosage / concentration
Process-specific concentration/application rate. Confirm against the manufacturing stage, substrate, bath/equipment and current Everklin technical data.
- 01
Confirm the task, soil/process condition and target surface/equipment.
- 02
Review compatibility and the approved site/manufacturing procedure.
- 03
Prepare or dose the product only at the verified product-specific concentration.
- 04
Use only in approved process stage with substrate compatibility and rinse/finish controls
- 05
Control relevant dwell/contact, mechanical action, flow or wash-stage conditions.
- 06
Rinse, recover, flush or finish as required by the approved procedure.
- 07
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
Technical properties
- Product type
- SolarPro XYL-100 is part of Everklin's Solar Module Manufacturing Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Chemistry / format
- Specialty process solvent
- Application method
- Controlled wipe, swab or approved equipment application
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
- Surfaces verified by a compatibility test
Restrictions / where not to use
- Exact grade and purity require current product documentation
- Control ignition, ventilation, static and exposure risks through the SDS
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in the original closed container under the conditions stated in the current SDS and TDS. Keep segregated from incompatible materials.
Product questions
What problem does SOLARPRO XYL-100 address?
Stage-specific residue or surface condition
Where can SOLARPRO XYL-100 be used?
Verified solar manufacturing or installed-panel surfaces
How is SOLARPRO XYL-100 applied?
Use only in approved process stage with substrate compatibility and rinse/finish controls
What dilution or dosage is required?
Process-specific concentration/application rate. Confirm against the manufacturing stage, substrate, bath/equipment and current Everklin technical data.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Glass Cleaners
Cleaning programmes for module front glass before assembly and lamination.
- Process role
- Connects glass preparation to the material condition and the next bonding or lay-up stage.
- Where it fits
- Glass receiving, washing and pre-lamination preparation.
- Operating objective
- Support a controlled glass-cleaning route appropriate to the installed line.
- Typical zone
- Glass preparation line
Selection considerations
- Glass surface and incoming condition
- Installed washing or wipe process
- Downstream lay-up and lamination context
EVA Adhesive Cleaners
Cleaning programmes for EVA and adhesive residue associated with module assembly.
- Process role
- Treats encapsulant and adhesive residue as a distinct tooling and equipment-cleaning task.
- Where it fits
- Lay-up, lamination tooling and relevant post-lamination cleaning points.
- Operating objective
- Review product fit against the residue condition, cure state and equipment surface.
- Typical zone
- EVA lay-up and lamination equipment
Selection considerations
- Residue and cure-state information
- Tooling and substrate compatibility
- Cleaning method and current product guidance
Frame Degreasers
Degreasing programmes for aluminium frame preparation before assembly.
- Process role
- Keeps machining oil and handling soil review connected to the actual frame surface.
- Where it fits
- Frame preparation before framing and sealant application.
- Operating objective
- Support a controlled preparation route for the frame and downstream assembly step.
- Typical zone
- Frame preparation station
Selection considerations
- Frame finish and incoming soil
- Application and wipe method
- Downstream sealant or assembly context
Silicone Cleaners
Cleaning programmes for silicone and sealant residue in module assembly.
- Process role
- Separates sealant clean-up from general solvent and frame-cleaning decisions.
- Where it fits
- Framing, sealant application, junction-box assembly and relevant tooling.
- Operating objective
- Match the cleaning route to the residue condition and compatible substrate.
- Typical zone
- Sealant and junction-box assembly
Selection considerations
- Silicone or sealant condition
- Surface and equipment compatibility
- Approved clean-up procedure
Flux Removers
Cleaning programmes for flux residue associated with stringing, tabbing and solder operations.
- Process role
- Keeps solder-process residue connected to the interconnect and pre-lamination stage.
- Where it fits
- Cell string preparation, bussing and selected solder-cleaning points.
- Operating objective
- Support controlled residue removal before downstream module assembly.
- Typical zone
- Stringing, tabbing and bussing area
Selection considerations
- Flux and solder-process context
- Cell and interconnect compatibility
- Cleaning method and current product documents
IPA & Specialty Solvents
IPA and specialty solvent options for validated module manufacturing cleaning tasks.
- Process role
- Provides a process-specific solvent family rather than a universal cleaning substitute.
- Where it fits
- Selected tooling, surface-preparation and final clean-down points.
- Operating objective
- Match solvent selection to the actual residue, substrate and process step.
- Typical zone
- Application-specific module assembly zones
Selection considerations
- Residue and surface information
- Required application and drying context
- Site procedure and current product documentation
Process context
Keep assembly surfaces and residues connected.
Assembly surfaces
Map preparation to glass, frame, interconnect and sealant-related assembly stages.
Residue / preparation control
Review each residue against its actual material and process location.
Final production cleaning
Keep final clean-down tied to the completed module and inspection route.
Technical documentation
View Document Library Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Technical Review Request Solar Module Manufacturing Review
Share the assembly stage, residue and current manufacturing context with Everklin.