Surface preparation happens before bonding
Glass, frame and assembly surfaces must be reviewed in the context of the downstream manufacturing step.
EVA Adhesive Cleaners
SolarPro EV-210
Removal of encapsulant or adhesive residue from compatible module tooling
Operating / process challenges
Preparation and cleaning decisions change across module assembly.
Residues change by process
Flux, adhesive, silicone, EVA and general manufacturing residues require distinct treatment approaches.
Final cleanliness supports assembly control
Cleaning and preparation should remain connected to the actual material and process stage.
Interactive 3D process map
Solar module assembly process map
Select a numbered application marker to open its category brief and current Everklin products.
- 01Cell stringing / tabbing
- 02Glass preparation
- 03EVA / encapsulant lay-up
- 04Cell matrix / bussing
- 05Lamination
- 06Frame preparation / framing
- 07Sealant / junction box assembly
- 08Final cleaning
- 09Electrical / visual inspection
Select an application marker or category. The active item stays synchronized in both views.
Category + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
EV-210
EVA Adhesive Cleaners
SolarPro EV-210
SolarPro EV-210 is part of Everklin's Solar Module Manufacturing Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.Removal of encapsulant or adhesive residue from compatible module tooling
Used for
Laminator tooling
- Primary application
- Laminator tooling
- Process / cleaning stage
- EVA Adhesive Cleaners
- Target soil / requirement
- EVA and adhesive residues around lay-up and lamination equipment
- Application method
- Validated tooling and surface clean-down
- Product role
- SolarPro EV-210 is part of Everklin's Solar Module Manufacturing Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Commercial pack
- 25 L
Selected product review
EV-210 Product Review
Technical Information
Product overview
SolarPro EV-210 is Everklin's solarpro ev-210 is part of everklin's solar module manufacturing chemicals portfolio for solar industry programmes. current product documents, application guidance and technical consultation are available on request. for removal of encapsulant or adhesive residue from compatible module tooling.
Selection begins with the real process stage, residue or soil, substrate, application method and downstream requirement. Exact operating values and product release information must be confirmed against the current Everklin TDS, SDS and approved site procedure.
EVA and adhesive residues around lay-up and lamination equipment
Removal of encapsulant or adhesive residue from compatible module tooling
EVA Adhesive Cleaners
Select when the residue, substrate and operating method match this documented product role.
Benefits & applications
Connects product choice to the actual process stage, residue and operating method.
Supports a documented route for preparation, application, finish and verification.
Keeps substrate, equipment and downstream process requirements visible before use.
Current PIS, TDS and SDS remain part of product approval and site rollout.
Everklin can review selection against the intended process and operating context.
Applications
- Laminator tooling
- Lay-up equipment
- Post-lamination residue removal
How to use
Final values remain subject to the current Everklin TDS and site validation.
| Condition | Use level | Temperature | Time | Method | Rinse / finish |
|---|---|---|---|---|---|
| EVA Adhesive Cleaners | Confirm with current Everklin TDS | Process and substrate dependent | Validate against soil release and the current procedure | Validated tooling and surface clean-down | Rinse / finish as specified in the current TDS |
- 01
Isolate equipment
- 02
Assess residue state
- 03
Apply approved cleaner
- 04
Agitate / wipe
- 05
Remove residue
- 06
Inspect before restart
Technical properties
- Product type
- SolarPro EV-210 is part of Everklin's Solar Module Manufacturing Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Chemistry / format
- EVA / laminator residue cleaner
- Application method
- Validated tooling and surface clean-down
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Approved tooling and equipment surfaces
Restrictions / where not to use
- Confirm cured / uncured residue and surface compatibility
- Isolate heated or energised equipment before cleaning
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in the original closed container under the conditions stated in the current SDS and TDS. Keep segregated from incompatible materials.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Glass Cleaners
Cleaning programmes for module front glass before assembly and lamination.
- Process role
- Connects glass preparation to the material condition and the next bonding or lay-up stage.
- Where it fits
- Glass receiving, washing and pre-lamination preparation.
- Operating objective
- Support a controlled glass-cleaning route appropriate to the installed line.
- Typical zone
- Glass preparation line
Selection considerations
- Glass surface and incoming condition
- Installed washing or wipe process
- Downstream lay-up and lamination context
EVA Adhesive Cleaners
Cleaning programmes for EVA and adhesive residue associated with module assembly.
- Process role
- Treats encapsulant and adhesive residue as a distinct tooling and equipment-cleaning task.
- Where it fits
- Lay-up, lamination tooling and relevant post-lamination cleaning points.
- Operating objective
- Review product fit against the residue condition, cure state and equipment surface.
- Typical zone
- EVA lay-up and lamination equipment
Selection considerations
- Residue and cure-state information
- Tooling and substrate compatibility
- Cleaning method and current product guidance
Frame Degreasers
Degreasing programmes for aluminium frame preparation before assembly.
- Process role
- Keeps machining oil and handling soil review connected to the actual frame surface.
- Where it fits
- Frame preparation before framing and sealant application.
- Operating objective
- Support a controlled preparation route for the frame and downstream assembly step.
- Typical zone
- Frame preparation station
Selection considerations
- Frame finish and incoming soil
- Application and wipe method
- Downstream sealant or assembly context
Silicone Cleaners
Cleaning programmes for silicone and sealant residue in module assembly.
- Process role
- Separates sealant clean-up from general solvent and frame-cleaning decisions.
- Where it fits
- Framing, sealant application, junction-box assembly and relevant tooling.
- Operating objective
- Match the cleaning route to the residue condition and compatible substrate.
- Typical zone
- Sealant and junction-box assembly
Selection considerations
- Silicone or sealant condition
- Surface and equipment compatibility
- Approved clean-up procedure
Flux Removers
Cleaning programmes for flux residue associated with stringing, tabbing and solder operations.
- Process role
- Keeps solder-process residue connected to the interconnect and pre-lamination stage.
- Where it fits
- Cell string preparation, bussing and selected solder-cleaning points.
- Operating objective
- Support controlled residue removal before downstream module assembly.
- Typical zone
- Stringing, tabbing and bussing area
Selection considerations
- Flux and solder-process context
- Cell and interconnect compatibility
- Cleaning method and current product documents
IPA & Specialty Solvents
IPA and specialty solvent options for validated module manufacturing cleaning tasks.
- Process role
- Provides a process-specific solvent family rather than a universal cleaning substitute.
- Where it fits
- Selected tooling, surface-preparation and final clean-down points.
- Operating objective
- Match solvent selection to the actual residue, substrate and process step.
- Typical zone
- Application-specific module assembly zones
Selection considerations
- Residue and surface information
- Required application and drying context
- Site procedure and current product documentation
Process context
Keep assembly surfaces and residues connected.
Assembly surfaces
Map preparation to glass, frame, interconnect and sealant-related assembly stages.
Residue / preparation control
Review each residue against its actual material and process location.
Final production cleaning
Keep final clean-down tied to the completed module and inspection route.
Technical documentation
Request Technical Documentation Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Solar Module Manufacturing Review Request Solar Module Manufacturing Review
Share the assembly stage, residue and current manufacturing context with Everklin.