Technical data
Application, compatibility and operating limits.
Request current documentEVERKLIN / WATER TREATMENT
Water treatment chemicals.
Connected to your system.
Application-led chemistry, system monitoring and technical support for industrial water, steam, cooling, membrane and effluent systems.
- 04
- Treatment systems
- 01
- Monitoring & dosing route
- Site-specific
- Selection & technical review
Then select the programme.Illustrative system visual
THE WATER TREATMENT PORTFOLIO
Your system.
Your starting point.
Four treatment systems, connected to monitoring and dosing. Explore programme families, operating evidence and technical-document requests in the right system context.
01RO Chemicals
For reverse-osmosis feed, membranes and cleaning loops.
- Membrane protection
- Feed conditioning
- Offline membrane cleaning
02Cooling Tower Chemicals
For recirculating cooling-water systems.
- Scale and corrosion control
- Microbiological programme paths
- Blowdown and monitoring context
03Boiler Chemicals
For steam-generation and condensate-return systems.
- Feedwater treatment
- Internal boiler chemistry
- Condensate and blowdown context
04ETP Chemicals
For industrial effluent-treatment sequences.
- pH correction
- Coagulation and flocculation
- Effluent conditioning routes
05Online Dosing Systems
For sensor-linked dosing and controlled chemical feed.
- Measurement and controller logic
- Metering and chemical feed
- Injection and monitoring context
Programme families support selection review. They do not confirm a formulation, product availability, dosage or approved operating limits.
FIND YOUR PROBLEM
Start with what you are seeing.
Identify possible causes and useful checks. This guide supports diagnosis; it does not prescribe a chemical or dose.
INTEGRATED CAPABILITIES
Analysis, application and control—connected.
Water analysis establishes the conditions. Application review connects the chemistry to the equipment. Monitoring tests whether the programme is achieving its intended operating objective.
Water & process assessment
Bring analysis, operating trends, deposits and treatment history. Identify the missing evidence before changing a programme.
Start technical assessment →Online monitoring & dosing
Connect conductivity, pH, ORP or flow signals to a reviewed response. Verify actual delivery and confirm supported hardware capabilities.
Explore control logic →Verification & optimization
Compare normalized performance, heat transfer, corrosion or effluent quality with an agreed baseline. Adjust only when operating evidence supports it.
Review operating performance →APPLICATION & PRODUCT SELECTION
Water treatment chemicals by system
Choose a programme for the installed water circuit, rather than treating every scale or corrosion problem as the same application.
RO antiscalant chemicals
Review feed-water analysis, recovery and membrane compatibility before selecting an antiscalant programme for reverse osmosis.
Boiler water treatment chemicals
Keep feedwater, internal boiler water and condensate requirements separate. Bring pressure, operating trends and treatment history to the review.
Cooling tower chemicals
Discuss the recirculating-water system, make-up water and control points when reviewing scale, corrosion or microbiological treatment needs.
Before choosing a product
Request current technical and safety documents. Product choice, dose and monitoring targets need a system-specific review; this overview is not a dosing instruction.
Find technical and safety documentsAPPLICATION EXPERTISE
Start with the operating challenge.
Application example: a site can separate raw-water, RO, boiler, condensate, cooling and effluent circuits before selecting programmes.
- Variable make-up water and system concentration
- Scale, corrosion, deposit and microbiological risk
- Different requirements across RO, boiler, cooling and effluent systems
- Monitoring and dosing matched to actual system control
What informs programme selection?
- Process / soil
- Identify the water circuit, contaminant and operating risk.
- Material
- Confirm metallurgy, membranes, media and wetted components.
- Water / temperature
- Review current analysis, temperature, pressure, cycles and flow conditions.
- Required result
- Define protection, water-quality, reliability or discharge objective.
- Control limits
- Set chemistry and control parameters only from system evidence and technical review.
HOW WE WORK
A clear route from task to programme.
- 01
Analyze
Establish water quality, equipment and operating evidence.
- 02
Identify
Distinguish the problem and likely causes.
- 03
Select
Review compatible treatment and control options.
- 04
Apply
Follow an approved site-specific method.
- 05
Monitor
Verify delivery and measure the operating response.
- 06
Optimize
Review performance against the baseline and refine the approach.
DOCUMENTATION / TECHNICAL REVIEW
The right information.
Before application.
Request current, product-specific documents. Availability and technical approval are separate checks; a request link is not an approved downloadable document.
Product information
Product identity and the intended programme context.
Request current documentSafety information
Handling, storage and product-specific precautions.
Request current documentBatch quality evidence
Request batch-specific evidence where applicable; no batch certificate is assumed.
Batch-specific requestSTART A TECHNICAL REVIEW
Build the right programme for your operation.
Tell us about your application, operating priorities and current challenge.