Glass Cleaners
Incoming module glass needs controlled preparation matched to surface condition, washing method and downstream lay-up.
EVA Adhesive Cleaners
SOLARPRO EV-220
Removal of encapsulant or adhesive residue from compatible module tooling
Operating / process challenges
Preparation and cleaning decisions change across module assembly.
Everklin Living Process Platform
Solar module assembly process
Inspect the connected module route from stringing and glass preparation through lay-up, lamination, framing, sealant work and final inspection.
System overviewIncoming glass surface condition before lay-up
Select any numbered process point to inspect its operating challenge and treatment context.
Process stages
Monitoring referencesNo live plant values are shown.
Surface ConditionResidue TypeMaterial CompatibilityApplication MethodDrying RequirementFinal Inspection
Choose by task + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
EV-220
EVA Adhesive Cleaners
SOLARPRO EV-220
Specially formulated cleaner for effective removal of EVA residues, release agents, oils and other contaminants from laminator plates. EnsuresRemoval of encapsulant or adhesive residue from compatible module tooling
Used forLaminator tooling
- Primary application
- Laminator tooling
- Process / cleaning stage
- EVA Adhesive Cleaners
- Target soil / requirement
- EVA and adhesive residues around lay-up and lamination equipment
- Application method
- Validated tooling and surface clean-down
- Product role
- Specially formulated cleaner for effective removal of EVA residues, release agents, oils and other contaminants from laminator plates. Ensures
- Commercial pack
- 25 L
Selected product
Product Overview
Technical Information
At a glance
SOLARPRO EV-220 is Everklin's specially formulated cleaner for effective removal of eva residues, release agents, oils and other contaminants from laminator plates. ensures for removal of encapsulant or adhesive residue from compatible module tooling.
Selection begins with the real process stage, residue or soil, substrate, application method and downstream requirement. Exact operating values and product release information must be confirmed against the current Everklin TDS, SDS and approved site procedure.
Specially formulated cleaner for effective removal of EVA residues, release agents, oils and other contaminants from laminator plates. Ensures
EVA Adhesive Cleaners
Laminator tooling
Validated tooling and surface clean-down
EVA and adhesive residues around lay-up and lamination equipment
Laminator tooling
Approved tooling and equipment surfaces
25 L
- Product
- EV-220
- Chemistry / format
- EVA / laminator residue cleaner
- Application
- Validated tooling and surface clean-down
- Technical values
- Refer to the current approved TDS
Benefits & applications
Supports the selected eva adhesive cleaners when used under the current approved procedure.
Supports the selected eva adhesive cleaners when used under the current approved procedure.
Supports the selected eva adhesive cleaners when used under the current approved procedure.
Supports the selected eva adhesive cleaners when used under the current approved procedure.
Supports the selected eva adhesive cleaners when used under the current approved procedure.
Applications
- Laminator tooling
- Lay-up equipment
- Post-lamination residue removal
How the result should be verified
Inspect and verify the result using the approved process procedure.
How to use
Final values remain subject to the current Everklin TDS and site validation.
Dilution / dosage / concentration
Request the current approved TDS for product-specific dilution or dosage.
| Condition | Use level | Temperature | Time | Method | Rinse / finish |
|---|---|---|---|---|---|
| EVA Adhesive Cleaners | Confirm with current Everklin TDS | Process and substrate dependent | Validate against soil release and the current procedure | Validated tooling and surface clean-down | Rinse / finish as specified in the current TDS |
- 01
Dilute with water as per recommended ratio.
- 02
Apply on the plate surface by spray, brush or wipe.
- 03
Allow to act for 1-3 minutes.
- 04
Wipe or rinse thoroughly with clean water.
- 05
Dry the plate before lamination. MAKE IN INDIA EXTENDS PLATE LIFE
Technical properties
- Product type
- Specially formulated cleaner for effective removal of EVA residues, release agents, oils and other contaminants from laminator plates. Ensures
- Chemistry / format
- EVA / laminator residue cleaner
- Application method
- Validated tooling and surface clean-down
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Approved tooling and equipment surfaces
Restrictions / where not to use
- Confirm cured / uncured residue and surface compatibility
- Isolate heated or energised equipment before cleaning
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in a cool dry & well Manual Cleaning (Undiluted pH (1% Solution) : 9.5 - 10.5 ventilated area. 1: 5 with Water) Specific Gravity : 1.01 - 1.05 Automatic System (1: 20 - 1:50 with Water) Use Di Water for Best Results Flash Point > 60°C Solubility Miscible in Water Keep container tightly closed when not in use. Protect from direct sunlight & heat. ISO 9001:2015 CERTIFED www.everklin.in
Product questions
Where does SOLARPRO EV-220 fit in the process?
It is positioned at the eva adhesive cleaners stage shown in the flagship process map.
How should the operating level be selected?
Use the current Everklin TDS and validate the starting condition against soil, substrate, equipment and the approved site procedure.
What compatibility checks are required?
Confirm every product-contact surface, seal, coating, tool and downstream process before wider use. A controlled trial may be required.
What finish or rinse is required?
Follow the product-specific TDS and the process release procedure. Do not infer a no-rinse claim where one is not documented.
Which documents should be reviewed before use?
Review the current Product Information Sheet, Technical Data Sheet and Safety Data Sheet, then record the approved site method.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Glass Cleaners
Cleaning programmes for module front glass before assembly and lamination.
- Process role
- Connects glass preparation to the material condition and the next bonding or lay-up stage.
- Where it fits
- Glass receiving, washing and pre-lamination preparation.
- Operating objective
- Support a controlled glass-cleaning route appropriate to the installed line.
- Typical zone
- Glass preparation line
Selection considerations
- Glass surface and incoming condition
- Installed washing or wipe process
- Downstream lay-up and lamination context
EVA Adhesive Cleaners
Cleaning programmes for EVA and adhesive residue associated with module assembly.
- Process role
- Treats encapsulant and adhesive residue as a distinct tooling and equipment-cleaning task.
- Where it fits
- Lay-up, lamination tooling and relevant post-lamination cleaning points.
- Operating objective
- Review product fit against the residue condition, cure state and equipment surface.
- Typical zone
- EVA lay-up and lamination equipment
Selection considerations
- Residue and cure-state information
- Tooling and substrate compatibility
- Cleaning method and current product guidance
Frame Degreasers
Degreasing programmes for aluminium frame preparation before assembly.
- Process role
- Keeps machining oil and handling soil review connected to the actual frame surface.
- Where it fits
- Frame preparation before framing and sealant application.
- Operating objective
- Support a controlled preparation route for the frame and downstream assembly step.
- Typical zone
- Frame preparation station
Selection considerations
- Frame finish and incoming soil
- Application and wipe method
- Downstream sealant or assembly context
Silicone Cleaners
Cleaning programmes for silicone and sealant residue in module assembly.
- Process role
- Separates sealant clean-up from general solvent and frame-cleaning decisions.
- Where it fits
- Framing, sealant application, junction-box assembly and relevant tooling.
- Operating objective
- Match the cleaning route to the residue condition and compatible substrate.
- Typical zone
- Sealant and junction-box assembly
Selection considerations
- Silicone or sealant condition
- Surface and equipment compatibility
- Approved clean-up procedure
Flux Removers
Cleaning programmes for flux residue associated with stringing, tabbing and solder operations.
- Process role
- Keeps solder-process residue connected to the interconnect and pre-lamination stage.
- Where it fits
- Cell string preparation, bussing and selected solder-cleaning points.
- Operating objective
- Support controlled residue removal before downstream module assembly.
- Typical zone
- Stringing, tabbing and bussing area
Selection considerations
- Flux and solder-process context
- Cell and interconnect compatibility
- Cleaning method and current product documents
IPA & Specialty Solvents
IPA and specialty solvent options for validated module manufacturing cleaning tasks.
- Process role
- Provides a process-specific solvent family rather than a universal cleaning substitute.
- Where it fits
- Selected tooling, surface-preparation and final clean-down points.
- Operating objective
- Match solvent selection to the actual residue, substrate and process step.
- Typical zone
- Application-specific module assembly zones
Selection considerations
- Residue and surface information
- Required application and drying context
- Site procedure and current product documentation
Process context
Keep assembly surfaces and residues connected.
Assembly surfaces
Map preparation to glass, frame, interconnect and sealant-related assembly stages.
Residue / preparation control
Review each residue against its actual material and process location.
Final production cleaning
Keep final clean-down tied to the completed module and inspection route.
Technical documentation
View Document Library Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Technical Review Request Solar Module Manufacturing Review
Share the assembly stage, residue and current manufacturing context with Everklin.