Soil type changes the cleaning approach
Dust, mineral deposits and environmental residues should be reviewed against the actual panel surface and site condition.
Neutral Panel Cleaner
SolarClean NEUTRA
Routine cleaning of installed photovoltaic module surfaces
Operating / process challenges
Soil, water and method shape the panel-cleaning approach.
Water quality matters
Cleaning water and drying behaviour remain part of the application review.
Method must match the installation
Manual, assisted or mechanised cleaning should align with the installed system and approved maintenance procedure.
Interactive 3D process map
Installed panel cleaning application map
Select a numbered application marker to open its category brief and current Everklin products.
- 01Installed PV array
- 02Surface inspection
- 03Soil / deposit identification
- 04Water / cleaning preparation
- 05Controlled application
- 06Manual / mechanised cleaning
- 07Rinse where applicable
- 08Final surface check
Select an application marker or category. The active item stays synchronized in both views.
Category + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
NEUTRA
Neutral Panel Cleaner
SolarClean NEUTRA
SolarClean NEUTRA is part of Everklin's Solar Panel Cleaning Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.Routine cleaning of installed photovoltaic module surfaces
Used for
Utility-scale arrays
- Primary application
- Utility-scale arrays
- Process / cleaning stage
- Neutral Panel Cleaner
- Target soil / requirement
- Dust, light atmospheric soil and routine surface contamination
- Application method
- Approved manual or mechanised panel-cleaning method
- Product role
- SolarClean NEUTRA is part of Everklin's Solar Panel Cleaning Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Commercial pack
- 25 L
Selected product review
NEUTRA Product Review
Technical Information
Product overview
SolarClean NEUTRA is Everklin's solarclean neutra is part of everklin's solar panel cleaning chemicals portfolio for solar industry programmes. current product documents, application guidance and technical consultation are available on request. for routine cleaning of installed photovoltaic module surfaces.
Selection begins with the real process stage, residue or soil, substrate, application method and downstream requirement. Exact operating values and product release information must be confirmed against the current Everklin TDS, SDS and approved site procedure.
Dust, light atmospheric soil and routine surface contamination
Routine cleaning of installed photovoltaic module surfaces
Neutral Panel Cleaner
Select when the residue, substrate and operating method match this documented product role.
Benefits & applications
Connects product choice to the actual process stage, residue and operating method.
Supports a documented route for preparation, application, finish and verification.
Keeps substrate, equipment and downstream process requirements visible before use.
Current PIS, TDS and SDS remain part of product approval and site rollout.
Everklin can review selection against the intended process and operating context.
Applications
- Utility-scale arrays
- Rooftop PV installations
- Routine module maintenance
How to use
Final values remain subject to the current Everklin TDS and site validation.
| Condition | Use level | Temperature | Time | Method | Rinse / finish |
|---|---|---|---|---|---|
| Neutral Panel Cleaner | Confirm with current Everklin TDS | Process and substrate dependent | Validate against soil release and the current procedure | Approved manual or mechanised panel-cleaning method | Rinse / finish as specified in the current TDS |
- 01
Inspect array
- 02
Assess soil and temperature
- 03
Apply cleaning method
- 04
Agitate gently
- 05
Rinse / finish
- 06
Inspect surface
Technical properties
- Product type
- SolarClean NEUTRA is part of Everklin's Solar Panel Cleaning Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Chemistry / format
- Neutral panel cleaner
- Application method
- Approved manual or mechanised panel-cleaning method
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Installed module glass after manufacturer review
Restrictions / where not to use
- Do not use abrasive tools or work on unsafe hot / energised conditions
- Follow module manufacturer and site O&M guidance
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in the original closed container under the conditions stated in the current SDS and TDS. Keep segregated from incompatible materials.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Neutral Panel Cleaner
Neutral cleaning chemistry for routine soil on installed photovoltaic surfaces.
- Process role
- Keeps routine surface cleaning connected to panel condition and the approved maintenance method.
- Where it fits
- Installed modules after inspection and soil assessment.
- Operating objective
- Support controlled removal of routine surface soil without generic abrasive treatment.
- Typical zone
- Installed panel surface
Selection considerations
- Panel surface and soil condition
- Water quality and cleaning method
- Site maintenance procedure
DM Water Rinse Aid
Rinse support for panel-cleaning programmes using suitable treated water.
- Process role
- Keeps final rinsing and drying behaviour visible within the overall cleaning route.
- Where it fits
- Final rinse stage after the selected cleaning method.
- Operating objective
- Review rinse support against the available water and surface-drying context.
- Typical zone
- Rinse-water and final drying stage
Selection considerations
- Available rinse-water quality
- Application and drying conditions
- Installed panel and site procedure
Anti-Soiling Protective Coating
A protective surface-treatment category for application-specific anti-soiling review.
- Process role
- Separates protective treatment from the routine cleaning and rinsing stages.
- Where it fits
- Clean, prepared panel surfaces where the site procedure supports a coating step.
- Operating objective
- Review coating suitability against the actual module surface and maintenance programme.
- Typical zone
- Post-clean protective-treatment stage
Selection considerations
- Module surface and manufacturer guidance
- Site and environmental context
- Application procedure and current documentation
Bird Dropping Cleaner
Targeted cleaning chemistry for localized bird-dropping residue on installed panels.
- Process role
- Treats adherent localized soil separately from routine whole-array cleaning.
- Where it fits
- Affected panel areas identified during surface inspection.
- Operating objective
- Support residue softening and removal through a controlled, non-abrasive review route.
- Typical zone
- Localized panel-surface treatment
Selection considerations
- Residue condition and affected area
- Panel surface and approved tools
- Site cleaning and rinse procedure
Waterless Panel Cleaner
A waterless-cleaning category for installations where the approved method minimizes rinse-water use.
- Process role
- Keeps waterless application distinct from rinse-led cleaning programmes.
- Where it fits
- Installed arrays where site conditions and procedure support the method.
- Operating objective
- Match the cleaning route to soil condition, surface care and available site resources.
- Typical zone
- Water-limited field cleaning application
Selection considerations
- Soil load and panel condition
- Site water availability and method
- Approved maintenance procedure
Application context
Keep soil, water and surface care connected.
Soil / deposit condition
Start with the actual residue and panel-surface condition at the installation.
Cleaning water
Review water quality and final drying behaviour as part of the cleaning route.
Method / surface care
Match manual, assisted or mechanised cleaning to the system and approved procedure.
Technical documentation
Request Technical Documentation Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Solar Panel Cleaning Review Request Solar Panel Cleaning Review
Share the installation, soil condition, water information and current cleaning method with Everklin.