Neutral Panel Cleaner
Routine dust and environmental soil require a non-abrasive route matched to panel condition and cleaning method.
DM Water Rinse Aid
SOLARCLEAN DM-100
Final-rinse support within a treated-water panel-cleaning route
Operating / process challenges
Soil, water and method shape the panel-cleaning approach.
Everklin Living Process Platform
Installed solar panel cleaning process
Inspect the field-cleaning route where soil condition, water preparation, controlled application, mechanical cleaning, rinsing and final surface care intersect.
System overviewRoutine surface soil across installed photovoltaic glass
Select any numbered process point to inspect its operating challenge and treatment context.
Process stages
Monitoring referencesNo live plant values are shown.
Soil Type / LoadPanel Surface ConditionWater QualityPanel TemperatureCleaning MethodWeather / Drying Condition
+1 more
Final Surface Check
Choose by task + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
DM-100
DM Water Rinse Aid
SOLARCLEAN DM-100
SolarClean DM-100 is part of Everklin's Solar Panel Cleaning Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.Final-rinse support within a treated-water panel-cleaning route
Used forVerified solar manufacturing or installed-panel surfaces
- Primary application
- Verified solar manufacturing or installed-panel surfaces
- Process / cleaning stage
- DM Water Rinse Aid
- Target soil / requirement
- Water spotting and inconsistent drying after cleaning
- Application method
- Use only in approved process stage with substrate compatibility and rinse/finish controls
- Product role
- SolarClean DM-100 is part of Everklin's Solar Panel Cleaning Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Commercial pack
- 25 L
Selected product
Product Overview
Technical Information
At a glance
SolarClean DM-100 is positioned within Everklin's Installed Solar Panel Cleaning portfolio for solar-process cleaning / surface care. Selection should be based on the actual soil or process condition, surface/equipment compatibility, application method and the approved site procedure rather than product name alone.
Use this route when the operating requirement matches solar-process cleaning / surface care and the observed condition is consistent with stage-specific residue or surface condition.
SolarClean DM-100 is part of Everklin's Solar Panel Cleaning Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
DM Water Rinse Aid
Use this route when the operating requirement matches solar-process cleaning / surface care and the observed condition is consistent with stage-specific residue or surface condition.
Use only in approved process stage with substrate compatibility and rinse/finish controls
Water spotting and inconsistent drying after cleaning
Verified solar manufacturing or installed-panel surfaces
Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
25 L
Problems this product can help address
- Stage-specific residue or surface condition
- Product
- DM-100
- Chemistry / format
- DM-water rinse aid
- Application
- Use only in approved process stage with substrate compatibility and rinse/finish controls
- Technical values
- Refer to the current approved TDS
Benefits & applications
Applications
- Verified solar manufacturing or installed-panel surfaces
- DM-water panel-cleaning systems
- Final rinse after soil removal
- Spot-sensitive installations
How the result should be verified
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
How to use
Final values remain subject to the current Everklin TDS and site validation.
Dilution / dosage / concentration
Working dilution must be product- and task-specific (light/medium/heavy soil). Confirm the current Everklin value before publication/use; do not substitute a generic category dilution.
- 01
Confirm the task, soil/process condition and target surface/equipment.
- 02
Review compatibility and the approved site/manufacturing procedure.
- 03
Prepare or dose the product only at the verified product-specific concentration.
- 04
Use only in approved process stage with substrate compatibility and rinse/finish controls
- 05
Control relevant dwell/contact, mechanical action, flow or wash-stage conditions.
- 06
Rinse, recover, flush or finish as required by the approved procedure.
- 07
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
Technical properties
- Product type
- SolarClean DM-100 is part of Everklin's Solar Panel Cleaning Chemicals portfolio for solar industry programmes. Current product documents, application guidance and technical consultation are available on request.
- Chemistry / format
- DM-water rinse aid
- Application method
- Controlled final-rinse stage
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
- Approved module glass and rinse equipment
Restrictions / where not to use
- Verify water quality and manufacturer guidance
- Do not use as a substitute for soil removal
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in the original closed container under the conditions stated in the current SDS and TDS. Keep segregated from incompatible materials.
Product questions
What problem does SOLARCLEAN DM-100 address?
Stage-specific residue or surface condition
Where can SOLARCLEAN DM-100 be used?
Verified solar manufacturing or installed-panel surfaces
How is SOLARCLEAN DM-100 applied?
Use only in approved process stage with substrate compatibility and rinse/finish controls
What dilution or dosage is required?
Working dilution must be product- and task-specific (light/medium/heavy soil). Confirm the current Everklin value before publication/use; do not substitute a generic category dilution.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Neutral Panel Cleaner
Neutral cleaning chemistry for routine soil on installed photovoltaic surfaces.
- Process role
- Keeps routine surface cleaning connected to panel condition and the approved maintenance method.
- Where it fits
- Installed modules after inspection and soil assessment.
- Operating objective
- Support controlled removal of routine surface soil without generic abrasive treatment.
- Typical zone
- Installed panel surface
Selection considerations
- Panel surface and soil condition
- Water quality and cleaning method
- Site maintenance procedure
DM Water Rinse Aid
Rinse support for panel-cleaning programmes using suitable treated water.
- Process role
- Keeps final rinsing and drying behaviour visible within the overall cleaning route.
- Where it fits
- Final rinse stage after the selected cleaning method.
- Operating objective
- Review rinse support against the available water and surface-drying context.
- Typical zone
- Rinse-water and final drying stage
Selection considerations
- Available rinse-water quality
- Application and drying conditions
- Installed panel and site procedure
Anti-Soiling Protective Coating
A protective surface-treatment category for application-specific anti-soiling review.
- Process role
- Separates protective treatment from the routine cleaning and rinsing stages.
- Where it fits
- Clean, prepared panel surfaces where the site procedure supports a coating step.
- Operating objective
- Review coating suitability against the actual module surface and maintenance programme.
- Typical zone
- Post-clean protective-treatment stage
Selection considerations
- Module surface and manufacturer guidance
- Site and environmental context
- Application procedure and current documentation
Bird Dropping Cleaner
Targeted cleaning chemistry for localized bird-dropping residue on installed panels.
- Process role
- Treats adherent localized soil separately from routine whole-array cleaning.
- Where it fits
- Affected panel areas identified during surface inspection.
- Operating objective
- Support residue softening and removal through a controlled, non-abrasive review route.
- Typical zone
- Localized panel-surface treatment
Selection considerations
- Residue condition and affected area
- Panel surface and approved tools
- Site cleaning and rinse procedure
Waterless Panel Cleaner
A waterless-cleaning category for installations where the approved method minimizes rinse-water use.
- Process role
- Keeps waterless application distinct from rinse-led cleaning programmes.
- Where it fits
- Installed arrays where site conditions and procedure support the method.
- Operating objective
- Match the cleaning route to soil condition, surface care and available site resources.
- Typical zone
- Water-limited field cleaning application
Selection considerations
- Soil load and panel condition
- Site water availability and method
- Approved maintenance procedure
Application context
Keep soil, water and surface care connected.
Soil / deposit condition
Start with the actual residue and panel-surface condition at the installation.
Cleaning water
Review water quality and final drying behaviour as part of the cleaning route.
Method / surface care
Match manual, assisted or mechanised cleaning to the system and approved procedure.
Technical documentation
View Document Library Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Technical Review Request Solar Panel Cleaning Review
Share the installation, soil condition, water information and current cleaning method with Everklin.