Professional Floor Care Solutions

What it is, what it does, and why it is used

A protective floor finish proposed for compatible resilient and masonry surfaces.

Technical and formulation-dependent claims remain reference material until EVERKLIN approves the current formulation, TDS, SDS and test evidence.

Product

F9

Programme

Floor Care

Application

Remove old finish where required, rinse, dry

Technical values

Refer to the current approved TDS

Benefits & applications

Recommended applications

• Compatible vinyl / PVC
• Compatible acrylic / epoxy
• Linoleum — review required
• Compatible masonry

How to use

Reference values are shown for review only; confirm final values against the current EVERKLIN TDS and site validation.

1. 01

   Confirm the intended task, soil, surface or equipment and review the current EVERKLIN label, TDS and SDS.

2. 02

   Prepare: Verify stripping process; Allow floor to dry; Remove old finish where required, rinse, dry (reference — verify before use).

3. 03

   Apply finish: Neat / ready-to-use reference; Approx. 30 minutes dry per coat; Uniform coat; additional coats as appropriate (reference — verify before use).

4. 04

   Complete the validated rinse, drying, release or return-to-service step and record the result.

Technical properties

Technical data status

Reference benchmark only — EVERKLIN TDS/SDS/test verification required

Reference / verification required — Appearance

Opaque / colourless liquid

Reference / verification required — Odour

Mild ammonia-type reference

Reference / verification required — Relative Density @20°C

Approx. 1.02 g/cm³

Reference / verification required — PH

Approx. 9

Reference / verification required — Water Solubility

Fully miscible reference

Reference / verification required — Claims

Scuff / heel-mark resistance, soil-embedment resistance, non-buffable — verify

Compatibility & safety

Packaging & documents