Fryer / Carbonised Soil
Baked-on oil and carbon require a dedicated cleaning route based on fryer design, soil load and restart procedure.
Operating / process challenges
Fryer soil, line movement and plant hygiene need separate programme decisions.
Everklin Living Process Platform
Snacks processing hygiene system
Inspect the connected snacks line from preparation and frying through cooling, seasoning, conveying and packaging, with dedicated CIP, open-plant, sanitation and foam-control decisions.
System overviewCarbonised oil and baked-on soil at the fryer
Select any numbered process point to inspect its operating challenge and treatment context.
Process stages
Monitoring referencesNo live plant values are shown.
Fryer ConditionCarbonised SoilOil / Grease LoadCIP ConcentrationFoam CoverageSanitizer Contact Time
+1 more
Final Rinse Condition
Choose by task + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
ACIFOM
Foam Cleaning
ACIFOM
High-Foam Acidic Cleaner for Effective Removal of Scale, Minerals Milk Stone & Inorganic DepositsCIP & COP DAILY USE
Used forCompatible acid-resistant equipment/surfaces
- Primary application
- Compatible acid-resistant equipment/surfaces
- Process / cleaning stage
- Foam Cleaning
- Target soil / requirement
- Adherent process soil on exposed equipment, walls and open production surfaces
- Application method
- Use controlled acid-cleaning route; verify compatibility; rinse thoroughly
- Product role
- High-Foam Acidic Cleaner for Effective Removal of Scale, Minerals Milk Stone & Inorganic Deposits
- Commercial pack
- 25 L
Selected product
Product Overview
Technical Information
At a glance
Acid Foam Cleaner is positioned within Everklin's Brewery / Beverage / Food / Dairy / Snacks portfolio for mineral-deposit removal. Selection should be based on the actual soil or process condition, surface/equipment compatibility, application method and the approved site procedure rather than product name alone.
Use this route when the operating requirement matches mineral-deposit removal and the observed condition is consistent with scale, mineral film, milkstone or inorganic deposit.
High-Foam Acidic Cleaner for Effective Removal of Scale, Minerals Milk Stone & Inorganic Deposits
Foam Cleaning
Use this route when the operating requirement matches mineral-deposit removal and the observed condition is consistent with scale, mineral film, milkstone or inorganic deposit.
Use controlled acid-cleaning route; verify compatibility; rinse thoroughly
Adherent process soil on exposed equipment, walls and open production surfaces
Compatible acid-resistant equipment/surfaces
Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
25 L
Problems this product can help address
- Scale
- mineral film
- milkstone or inorganic deposit
- Product
- ACIFOM
- Chemistry / format
- Foam-applied process cleaner
- Application
- Use controlled acid-cleaning route; verify compatibility; rinse thoroughly
- Technical values
- Refer to the current approved TDS
Benefits & applications
Applications
- Compatible acid-resistant equipment/surfaces
- Machine exteriors
- Vertical process surfaces
- Open plant cleaning zones
How the result should be verified
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
How to use
Final values remain subject to the current Everklin TDS and site validation.
Dilution / dosage / concentration
Concentration is process-specific. Establish from product role, soil, equipment, temperature, time and validation. Use current Everklin TDS/site SOP before production use.
- 01
Confirm the task, soil/process condition and target surface/equipment.
- 02
Review compatibility and the approved site/manufacturing procedure.
- 03
Prepare or dose the product only at the verified product-specific concentration.
- 04
Use controlled acid-cleaning route; verify compatibility; rinse thoroughly
- 05
Control relevant dwell/contact, mechanical action, flow or wash-stage conditions.
- 06
Rinse, recover, flush or finish as required by the approved procedure.
- 07
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
Technical properties
- Product type
- High-Foam Acidic Cleaner for Effective Removal of Scale, Minerals Milk Stone & Inorganic Deposits
- Chemistry / format
- Foam-applied process cleaner
- Application method
- Low-pressure foam application with controlled dwell and rinse
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
- Approved washable process-area surfaces
- Professional foam application equipment
Restrictions / where not to use
- Protect electrical and non-washable equipment
- Confirm surface compatibility and complete rinsing requirements
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in a cool dry & well ventilated area. Specific Gravity : 1.05 - 1.12 Foam Height: High Keep container tightly closed when not in use. Solubility Completely Miscible in Water Protect from direct sunlight & heat.
Product questions
What problem does ACIFOM address?
Scale, mineral film, milkstone or inorganic deposit
Where can ACIFOM be used?
Compatible acid-resistant equipment/surfaces
How is ACIFOM applied?
Use controlled acid-cleaning route; verify compatibility; rinse thoroughly
What dilution or dosage is required?
Concentration is process-specific. Establish from product role, soil, equipment, temperature, time and validation. Use current Everklin TDS/site SOP before production use.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Fryer / Carbonised Soil
Specialist cleaning for carbonised oil and baked-on soil in snacks fryers.
- Process role
- Treats fryer boil-out and maintenance cleaning as a dedicated equipment programme.
- Where it fits
- Continuous fryers, cooking hoods and connected oil-contact equipment.
- Operating objective
- Match the cleaning route to fryer design, carbon build-up and the approved restart procedure.
- Typical zone
- Fryer and cooking zone
Selection considerations
- Fryer material and configuration
- Carbonised soil and grease load
- Boil-out, rinse and restart procedure
Heavy Oil / Grease
Alkaline cleaning options for heavy edible-oil and grease soil around snacks processing equipment.
- Process role
- Keeps heavy grease removal distinct from routine open-plant cleaning.
- Where it fits
- Selected process equipment and grease-affected production surfaces.
- Operating objective
- Review chemistry against the soil load, surface and application method.
- Typical zone
- Oil and grease cleaning points
Selection considerations
- Soil severity and temperature
- Surface compatibility
- Application and rinse method
Open Plant Cleaning
Open-plant cleaning programmes for external equipment, floors and exposed production areas.
- Process role
- Keeps open-surface cleaning separate from closed-process CIP.
- Where it fits
- Machine exteriors, floors, drains and surrounding production areas.
- Operating objective
- Build a controlled cleaning route around the actual open-plant soil and surface.
- Typical zone
- Open production environment
Selection considerations
- Surface and soil condition
- Cleaning method and available contact time
- Site procedure and rinse context
Foam Cleaning
Foam-applied cleaning programmes for exposed equipment and surfaces.
- Process role
- Supports visible coverage and contact on suitable open surfaces.
- Where it fits
- External equipment, vertical surfaces and open production areas.
- Operating objective
- Match foam application to the intended surface and cleaning procedure.
- Typical zone
- Open equipment and surface-cleaning zone
Selection considerations
- Surface and soil condition
- Foam application equipment
- Rinse and site procedure
CIP Cleaning
Closed-process cleaning programmes for tanks, lines and connected process equipment.
- Process role
- Supports structured cleaning of product-contact circuits without treating open plant as part of the same task.
- Where it fits
- CIP station, process vessels, transfer lines and filling circuits.
- Operating objective
- Connect the cleaning sequence to the actual equipment route and operating context.
- Typical zone
- Closed process equipment and CIP return
Selection considerations
- Equipment and circuit configuration
- Soil and process condition
- Cleaning method, temperature and contact time
Sanitation
Sanitisation programmes for cleaned processing and hygiene-critical surfaces.
- Process role
- Supports the post-clean hygiene step within the approved site procedure.
- Where it fits
- Relevant cleaned surfaces, filling areas and process environment.
- Operating objective
- Connect sanitisation to the preceding cleaning step and intended hygiene zone.
- Typical zone
- Cleaned processing and filling environment
Selection considerations
- Surface and application context
- Pre-cleaning and site procedure
- Current product documentation
Foam Control
Foam-control support for relevant process or cleaning conditions.
- Process role
- Addresses unwanted foam as a separate operating consideration.
- Where it fits
- The relevant process or cleaning-support point after technical review.
- Operating objective
- Connect foam-control selection to the observed operating context.
- Typical zone
- Process or cleaning foam-control point
Selection considerations
- Observed foam source
- Process and application context
- Current technical documentation
Application context
Connect fryer, conveyor and sanitation support.
Fryer / process equipment
Review cleaning against the installed fryer, cooking route and connected process equipment.
Conveyor / open plant
Keep transfer, external equipment and floor cleaning tied to their actual zones.
Water / sanitation support
Connect supporting programmes to the relevant point of use and site procedure.
Technical documentation
View Document Library Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Technical Review Request Snacks Processing Hygiene Review
Share the process area, cleaning challenge and current operating context with Everklin.