Process equipment needs a defined cleaning route
Tanks, mixers, transfer equipment and thermal-process areas need cleaning mapped to their actual use.
CIP Cleaning
QUATXA
Post-clean sanitation within the current approved site procedure
Operating / process challenges
A food hygiene programme needs to follow the process, not a generic plant list.
Conveyors and open plant remain distinct
Movement, equipment exteriors and floors create different operating hygiene contexts.
Water and sanitation support the full environment
Process-water and post-clean sanitation decisions need to connect to the relevant point of use.
Interactive 3D hygiene map
Typical food processing hygiene map
This representative map links hygiene categories to typical food-processing zones without implying every plant uses the same sequence.
Category + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
QUATXA
QUATXA
High Performance Disinfectant for Post-CIP Surface & Equipment DisinfectionPost-clean sanitation within the current approved site procedure
Used for
Cleaned process-area surfaces
- Primary application
- Cleaned process-area surfaces
- Process / cleaning stage
- Surface Sanitizers
- Target soil / requirement
- Hygiene control after effective cleaning of suitable process surfaces
- Application method
- Approved site-specific sanitation method
- Product role
- High Performance Disinfectant for Post-CIP Surface & Equipment Disinfection
- Commercial pack
- 25 L
Selected product review
QUATXA Product Review
Technical Information
Product overview
QUATXA is Everklin's high performance disinfectant for post-cip surface & equipment disinfection for post-clean sanitation within the current approved site procedure.
Selection begins with the real process stage, residue or soil, substrate, application method and downstream requirement. Exact operating values and product release information must be confirmed against the current Everklin TDS, SDS and approved site procedure.
Hygiene control after effective cleaning of suitable process surfaces
Post-clean sanitation within the current approved site procedure
Select when the residue, substrate and operating method match this documented product role.
Benefits & applications
Supports the selected post-clean sanitation within the current approved site procedure when used under the current approved procedure.
Supports the selected post-clean sanitation within the current approved site procedure when used under the current approved procedure.
Supports the selected post-clean sanitation within the current approved site procedure when used under the current approved procedure.
Supports the selected post-clean sanitation within the current approved site procedure when used under the current approved procedure.
Connects product choice to the actual process stage, residue and operating method.
Applications
- Cleaned process-area surfaces
- Filling and hygiene-critical zones
- Post-clean sanitation steps
How to use
Final values remain subject to the current Everklin TDS and site validation.
| Condition | Use level | Temperature | Time | Method | Rinse / finish |
|---|---|---|---|---|---|
| Validated application | Confirm with current Everklin TDS | Process and substrate dependent | Validate against soil release and the current procedure | Approved site-specific sanitation method | Rinse / finish as specified in the current TDS |
- 01
Ensure surfaces pre- cleaned & rinsed.
- 02
Prepare dosing per label.
- 03
Apply/spray uniformly.
- 04
Maintain 2-5 min contact.
- 05
Drain / air dry. Verify with ATP / swab test periodically.
Technical properties
- Product type
- High Performance Disinfectant for Post-CIP Surface & Equipment Disinfection
- Chemistry / format
- Sanitation programme chemistry
- Application method
- Approved site-specific sanitation method
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Surfaces and equipment listed in the current product documentation
Restrictions / where not to use
- No efficacy, contact-time or no-rinse claim is made without current approved evidence
- Do not substitute sanitation for effective pre-cleaning
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in a cool dry & well ventilated area. pH (1% Solution) : 6.0 - 8.0 Specific Gravity: 1.00 - 1.05 Keep container tightiy closed when not in use. Solubility Completely Miscible in Water Protect from direct sunlight.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
CIP Cleaning
Closed-process cleaning programmes for tanks, lines and connected process equipment.
- Process role
- Supports structured cleaning of product-contact circuits without treating open plant as part of the same task.
- Where it fits
- CIP station, process vessels, transfer lines and filling circuits.
- Operating objective
- Connect the cleaning sequence to the actual equipment route and operating context.
- Typical zone
- Closed process equipment and CIP return
Selection considerations
- Equipment and circuit configuration
- Soil and process condition
- Cleaning method, temperature and contact time
Open Plant Cleaning
Open-plant cleaning programmes for external equipment, floors and exposed production areas.
- Process role
- Keeps open-surface cleaning separate from closed-process CIP.
- Where it fits
- Machine exteriors, floors, drains and surrounding production areas.
- Operating objective
- Build a controlled cleaning route around the actual open-plant soil and surface.
- Typical zone
- Open production environment
Selection considerations
- Surface and soil condition
- Cleaning method and available contact time
- Site procedure and rinse context
Alkaline Cleaning
Alkaline-cleaning options for application contexts where organic soil is under review.
- Process role
- Provides a distinct chemistry route within the wider cleaning programme.
- Where it fits
- Selected process-equipment and plant-cleaning applications.
- Operating objective
- Review alkaline-cleaning fit against the actual soil, surface and cleaning method.
- Typical zone
- Selected organic-soil cleaning point
Selection considerations
- Soil and process condition
- Equipment and surface context
- Current product guidance
Acid Cleaning
Acid-cleaning options for application contexts where mineral soil is under review.
- Process role
- Provides a distinct chemistry route within the wider cleaning programme.
- Where it fits
- Selected closed-process or equipment-cleaning applications.
- Operating objective
- Review acid-cleaning fit against the actual soil, surface and cleaning method.
- Typical zone
- Selected mineral-soil cleaning point
Selection considerations
- Soil and surface information
- Equipment compatibility review
- Current product guidance
Foam Cleaning
Foam-applied cleaning programmes for exposed equipment and surfaces.
- Process role
- Supports visible coverage and contact on suitable open surfaces.
- Where it fits
- External equipment, vertical surfaces and open production areas.
- Operating objective
- Match foam application to the intended surface and cleaning procedure.
- Typical zone
- Open equipment and surface-cleaning zone
Selection considerations
- Surface and soil condition
- Foam application equipment
- Rinse and site procedure
Fryer Cleaning
Specialist cleaning for continuous fryers and connected cooking equipment.
- Process role
- Keeps carbonised oil and grease removal separate from general open-plant cleaning.
- Where it fits
- Fryer, cooking hood and connected oil-contact equipment.
- Operating objective
- Review the cleaning route against fryer design, soil load and approved site procedure.
- Typical zone
- Fryer and cooking equipment
Selection considerations
- Fryer configuration and material
- Carbonised oil and grease condition
- Cleaning, rinse and restart procedure
Sanitation
Sanitisation programmes for cleaned processing and hygiene-critical surfaces.
- Process role
- Supports the post-clean hygiene step within the approved site procedure.
- Where it fits
- Relevant cleaned surfaces, filling areas and process environment.
- Operating objective
- Connect sanitisation to the preceding cleaning step and intended hygiene zone.
- Typical zone
- Cleaned processing and filling environment
Selection considerations
- Surface and application context
- Pre-cleaning and site procedure
- Current product documentation
Process Foam Control
Foam-control support for relevant process or cleaning conditions.
- Process role
- Addresses unwanted foam as a separate operating consideration.
- Where it fits
- The relevant process or cleaning-support point after technical review.
- Operating objective
- Connect foam-control selection to the observed operating context.
- Typical zone
- Process or cleaning foam-control point
Selection considerations
- Observed foam source
- Process and application context
- Current technical documentation
Application context
Keep equipment, open plant and water support connected.
Process equipment
Map cleaning to the actual vessels, transfer route and thermal process where applicable.
Conveyor / open plant
Review movement, external equipment and floors as distinct operating zones.
Process-water & sanitation
Connect supporting hygiene programmes to the relevant water and post-clean points.
Technical documentation
Request Product Documentation Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Food Processing Hygiene Review Request Food Processing Hygiene Review
Share the process area, cleaning challenge and current operating context with Everklin.