CIP Cleaning
Closed vessels and transfer circuits need cleaning mapped to the actual route, soil, sequence and return condition.
CIP Cleaning
FOAMEXA MULTI
Paper Processing - Textiles Industry - ETP (Effluent Treatment Plants) - Paints / Inks / Coatings - General
Operating / process challenges
A food hygiene programme needs to follow the process, not a generic plant list.
Everklin Living Process Platform
Food processing hygiene system
Inspect a representative food-manufacturing route where process equipment, thermal zones, fryer cleaning, CIP, open-plant cleaning and sanitation require distinct decisions.
System overviewClosed-process soil across vessels, lines and transfer equipment
Select any numbered process point to inspect its operating challenge and treatment context.
Process stages
Monitoring referencesNo live plant values are shown.
Soil / Deposit ConditionCIP ConcentrationReturn TemperatureReturn ConductivityFoam CoverageSanitizer Contact Time
+1 more
Final Rinse Condition
Choose by task + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
FOAMEXA MULTI
FOAMEXA MULTI
Silicone Defoamer 4Paper Processing - Textiles Industry - ETP (Effluent Treatment Plants) - Paints / Inks / Coatings - General
Used forApplication-specific process foam control
- Primary application
- Application-specific process foam control
- Process / cleaning stage
- Defoamers
- Target soil / requirement
- Persistent foam that disrupts capacity, transfer, separation or cleaning
- Application method
- Controlled dosing at the identified foam-generation point
- Product role
- Silicone Defoamer 4
- Commercial pack
- 25 L
Selected product
Product Overview
Technical Information
At a glance
FOAMEXA MULTI is Everklin's silicone defoamer 4 for application-specific control of unwanted foam in the reviewed process.
Selection begins with the real process stage, residue or soil, substrate, application method and downstream requirement. Exact operating values and product release information must be confirmed against the current Everklin TDS, SDS and approved site procedure.
Silicone Defoamer 4
Application-specific process foam control
Controlled dosing at the identified foam-generation point
Persistent foam that disrupts capacity, transfer, separation or cleaning
Application-specific process foam control
The reviewed process stream and installed dosing equipment
25 L
- Product
- FOAMEXA MULTI
- Chemistry / format
- Process foam-control product
- Application
- Controlled dosing at the identified foam-generation point
- Technical values
- Refer to the current approved TDS
Benefits & applications
Supports the selected application-specific control of unwanted foam in the reviewed process when used under the current approved procedure.
Supports the selected application-specific control of unwanted foam in the reviewed process when used under the current approved procedure.
Supports the selected application-specific control of unwanted foam in the reviewed process when used under the current approved procedure.
Supports the selected application-specific control of unwanted foam in the reviewed process when used under the current approved procedure.
Supports the selected application-specific control of unwanted foam in the reviewed process when used under the current approved procedure.
Applications
- Application-specific process foam control
- Cleaning or effluent support where approved
- Sector-specific production processes
How the result should be verified
Inspect and verify the result using the approved process procedure.
How to use
Final values remain subject to the current Everklin TDS and site validation.
Dilution / dosage / concentration
Request the current approved TDS for product-specific dilution or dosage.
| Condition | Use level | Temperature | Time | Method | Rinse / finish |
|---|---|---|---|---|---|
| Validated application | 50 - 100 ppm (Typical dose; plant-scale trial recommended; pre-dilute before automatic dosing) | Process and substrate dependent | Validate against soil release and the current procedure | Controlled dosing at the identified foam-generation point | Rinse / finish as specified in the current TDS |
- 01
Pre-dilute in mixing vessel.
- 02
Trial dose 50 - 100 ppm on process stream.
- 03
Confirm no BOD/COD impact on effluent.
- 04
Set automatic metering system.
- 05
Log dosage/batch.
Technical properties
- Product type
- Silicone Defoamer 4
- Chemistry / format
- Process foam-control product
- Application method
- Controlled dosing at the identified foam-generation point
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- The reviewed process stream and installed dosing equipment
Restrictions / where not to use
- Do not infer food-contact or food-grade status from the family name
- Confirm the exact application and downstream requirements
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in a cool, dry place. Keep container tightly closed. Protect from direct sunlight and moisture. Sheif life: 24 months from the date of manufacture. ISO 9001:2015 CERTIFIED
Product questions
Where does FOAMEXA MULTI fit in the process?
It is positioned at the application-specific control of unwanted foam in the reviewed process stage shown in the flagship process map.
How should the operating level be selected?
Use the current Everklin TDS and validate the starting condition against soil, substrate, equipment and the approved site procedure.
What compatibility checks are required?
Confirm every product-contact surface, seal, coating, tool and downstream process before wider use. A controlled trial may be required.
What finish or rinse is required?
Follow the product-specific TDS and the process release procedure. Do not infer a no-rinse claim where one is not documented.
Which documents should be reviewed before use?
Review the current Product Information Sheet, Technical Data Sheet and Safety Data Sheet, then record the approved site method.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
CIP Cleaning
Closed-process cleaning programmes for tanks, lines and connected process equipment.
- Process role
- Supports structured cleaning of product-contact circuits without treating open plant as part of the same task.
- Where it fits
- CIP station, process vessels, transfer lines and filling circuits.
- Operating objective
- Connect the cleaning sequence to the actual equipment route and operating context.
- Typical zone
- Closed process equipment and CIP return
Selection considerations
- Equipment and circuit configuration
- Soil and process condition
- Cleaning method, temperature and contact time
Open Plant Cleaning
Open-plant cleaning programmes for external equipment, floors and exposed production areas.
- Process role
- Keeps open-surface cleaning separate from closed-process CIP.
- Where it fits
- Machine exteriors, floors, drains and surrounding production areas.
- Operating objective
- Build a controlled cleaning route around the actual open-plant soil and surface.
- Typical zone
- Open production environment
Selection considerations
- Surface and soil condition
- Cleaning method and available contact time
- Site procedure and rinse context
Alkaline Cleaning
Alkaline-cleaning options for application contexts where organic soil is under review.
- Process role
- Provides a distinct chemistry route within the wider cleaning programme.
- Where it fits
- Selected process-equipment and plant-cleaning applications.
- Operating objective
- Review alkaline-cleaning fit against the actual soil, surface and cleaning method.
- Typical zone
- Selected organic-soil cleaning point
Selection considerations
- Soil and process condition
- Equipment and surface context
- Current product guidance
Acid Cleaning
Acid-cleaning options for application contexts where mineral soil is under review.
- Process role
- Provides a distinct chemistry route within the wider cleaning programme.
- Where it fits
- Selected closed-process or equipment-cleaning applications.
- Operating objective
- Review acid-cleaning fit against the actual soil, surface and cleaning method.
- Typical zone
- Selected mineral-soil cleaning point
Selection considerations
- Soil and surface information
- Equipment compatibility review
- Current product guidance
Foam Cleaning
Foam-applied cleaning programmes for exposed equipment and surfaces.
- Process role
- Supports visible coverage and contact on suitable open surfaces.
- Where it fits
- External equipment, vertical surfaces and open production areas.
- Operating objective
- Match foam application to the intended surface and cleaning procedure.
- Typical zone
- Open equipment and surface-cleaning zone
Selection considerations
- Surface and soil condition
- Foam application equipment
- Rinse and site procedure
Fryer Cleaning
Specialist cleaning for continuous fryers and connected cooking equipment.
- Process role
- Keeps carbonised oil and grease removal separate from general open-plant cleaning.
- Where it fits
- Fryer, cooking hood and connected oil-contact equipment.
- Operating objective
- Review the cleaning route against fryer design, soil load and approved site procedure.
- Typical zone
- Fryer and cooking equipment
Selection considerations
- Fryer configuration and material
- Carbonised oil and grease condition
- Cleaning, rinse and restart procedure
Sanitation
Sanitisation programmes for cleaned processing and hygiene-critical surfaces.
- Process role
- Supports the post-clean hygiene step within the approved site procedure.
- Where it fits
- Relevant cleaned surfaces, filling areas and process environment.
- Operating objective
- Connect sanitisation to the preceding cleaning step and intended hygiene zone.
- Typical zone
- Cleaned processing and filling environment
Selection considerations
- Surface and application context
- Pre-cleaning and site procedure
- Current product documentation
Process Foam Control
Foam-control support for relevant process or cleaning conditions.
- Process role
- Addresses unwanted foam as a separate operating consideration.
- Where it fits
- The relevant process or cleaning-support point after technical review.
- Operating objective
- Connect foam-control selection to the observed operating context.
- Typical zone
- Process or cleaning foam-control point
Selection considerations
- Observed foam source
- Process and application context
- Current technical documentation
Application context
Keep equipment, open plant and water support connected.
Process equipment
Map cleaning to the actual vessels, transfer route and thermal process where applicable.
Conveyor / open plant
Review movement, external equipment and floors as distinct operating zones.
Process-water & sanitation
Connect supporting hygiene programmes to the relevant water and post-clean points.
Technical documentation
View Document Library Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Technical Review Request Food Processing Hygiene Review
Share the process area, cleaning challenge and current operating context with Everklin.