Product-contact systems need structured cleaning
Tanks, process lines and filling equipment need hygiene programmes connected to the actual processing route.
Bottle Washing Solutions
ACIFOM
CIP & COP DAILY USE
Operating / process challenges
Different brewery zones need distinct hygiene programmes.
Packaging has its own hygiene requirements
Bottle washing, conveyors and filling areas solve different operating hygiene problems.
Open plant hygiene remains separate
Floors, machine exteriors and surrounding production areas require OPC and sanitation attention separate from closed-process CIP.
Interactive 3D hygiene map
Brewery process hygiene map
Select a numbered hygiene zone to open its category brief and current Everklin products.
Category + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
ACIFOM
ACIFOM
High-Foam Acidic Cleaner for Effective Removal of Scale, Minerals Milk Stone & Inorganic DepositsCIP & COP DAILY USE
Used for
Machine exteriors
- Primary application
- Machine exteriors
- Process / cleaning stage
- Foam Cleaners
- Target soil / requirement
- Adherent process soil on exposed equipment, walls and open production surfaces
- Application method
- Low-pressure foam application with controlled dwell and rinse
- Product role
- High-Foam Acidic Cleaner for Effective Removal of Scale, Minerals Milk Stone & Inorganic Deposits
- Commercial pack
- 25 L
Selected product review
ACIFOM Product Review
Technical Information
Product overview
ACIFOM is Everklin's high-foam acidic cleaner for effective removal of scale, minerals milk stone & inorganic deposits for visible-coverage cleaning of suitable open plant and equipment surfaces.
Selection begins with the real process stage, residue or soil, substrate, application method and downstream requirement. Exact operating values and product release information must be confirmed against the current Everklin TDS, SDS and approved site procedure.
Adherent process soil on exposed equipment, walls and open production surfaces
Visible-coverage cleaning of suitable open plant and equipment surfaces
Select when the residue, substrate and operating method match this documented product role.
Benefits & applications
Supports the selected visible-coverage cleaning of suitable open plant and equipment surfaces when used under the current approved procedure.
Supports the selected visible-coverage cleaning of suitable open plant and equipment surfaces when used under the current approved procedure.
Supports the selected visible-coverage cleaning of suitable open plant and equipment surfaces when used under the current approved procedure.
Supports the selected visible-coverage cleaning of suitable open plant and equipment surfaces when used under the current approved procedure.
Connects product choice to the actual process stage, residue and operating method.
Applications
- Machine exteriors
- Vertical process surfaces
- Open plant cleaning zones
How to use
Final values remain subject to the current Everklin TDS and site validation.
| Condition | Use level | Temperature | Time | Method | Rinse / finish |
|---|---|---|---|---|---|
| Validated application | DILUTION 1-10% v/v in water (depending on contamination level) | Process and substrate dependent | Validate against soil release and the current procedure | Low-pressure foam application with controlled dwell and rinse | Rinse / finish as specified in the current TDS |
- 01
Pre-rinse surface.
- 02
Dilute product (1-10% v/v) as per soiling level.
- 03
Foam-apply using foaming equipment.
- 04
Allow moderate foam contact.
- 05
Rinse thoroughly with potable water.
Technical properties
- Product type
- High-Foam Acidic Cleaner for Effective Removal of Scale, Minerals Milk Stone & Inorganic Deposits
- Chemistry / format
- Foam-applied process cleaner
- Application method
- Low-pressure foam application with controlled dwell and rinse
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Approved washable process-area surfaces
- Professional foam application equipment
Restrictions / where not to use
- Protect electrical and non-washable equipment
- Confirm surface compatibility and complete rinsing requirements
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in a cool dry & well ventilated area. Specific Gravity : 1.05 - 1.12 Foam Height: High Keep container tightly closed when not in use. Solubility Completely Miscible in Water Protect from direct sunlight & heat.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Bottle Washing Solutions
Container-washing programmes for returnable bottles before filling.
- Process role
- Treats bottle preparation as a dedicated packaging hygiene operation.
- Where it fits
- Bottle or container washing equipment before the filling line.
- Operating objective
- Connect product selection to the washer, soil and current operating route.
- Typical zone
- Bottle / container washer
Selection considerations
- Washer and container context
- Observed soil and current process
- Current product documentation
Conveyor Chain Lubricants
Conveyor lubrication programmes for controlled movement through filling and packaging.
- Process role
- Supports line movement as a distinct operating programme within packaging hygiene.
- Where it fits
- Bottle, can, tray or pack transfer conveyors.
- Operating objective
- Match the lubrication approach to the installed conveyor and operating conditions.
- Typical zone
- Transfer and packaging conveyor
Selection considerations
- Conveyor material and line layout
- Current operating and cleaning routine
- Application method and site procedure
CIP Cleaning Solutions
Closed-process cleaning programmes for tanks, lines and connected process equipment.
- Process role
- Supports structured cleaning of product-contact circuits without treating open plant as part of the same task.
- Where it fits
- CIP station, process vessels, transfer lines and filling circuits.
- Operating objective
- Connect the cleaning sequence to the actual equipment route and operating context.
- Typical zone
- Closed process equipment and CIP return
Selection considerations
- Equipment and circuit configuration
- Soil and process condition
- Cleaning method, temperature and contact time
Disinfectants & Sanitation
Sanitisation programmes for cleaned processing and hygiene-critical surfaces.
- Process role
- Supports the post-clean hygiene step within the approved site procedure.
- Where it fits
- Relevant cleaned surfaces, filling areas and process environment.
- Operating objective
- Connect sanitisation to the preceding cleaning step and intended hygiene zone.
- Typical zone
- Cleaned processing and filling environment
Selection considerations
- Surface and application context
- Pre-cleaning and site procedure
- Current product documentation
Open Plant Cleaning (OPC)
Open-plant cleaning programmes for external equipment, floors and exposed production areas.
- Process role
- Keeps open-surface cleaning separate from closed-process CIP.
- Where it fits
- Machine exteriors, floors, drains and surrounding production areas.
- Operating objective
- Build a controlled cleaning route around the actual open-plant soil and surface.
- Typical zone
- Open production environment
Selection considerations
- Surface and soil condition
- Cleaning method and available contact time
- Site procedure and rinse context
Foam Control
Foam-control support for relevant process or cleaning conditions.
- Process role
- Addresses unwanted foam as a separate operating consideration.
- Where it fits
- The relevant process or cleaning-support point after technical review.
- Operating objective
- Connect foam-control selection to the observed operating context.
- Typical zone
- Process or cleaning foam-control point
Selection considerations
- Observed foam source
- Process and application context
- Current technical documentation
Application context
Keep process, packaging and open plant connected.
Process equipment & CIP
Map cleaning decisions to tanks, pipe circuits, fillers and the installed CIP route.
Packaging & conveyor hygiene
Review container washing and conveyor lubrication as separate packaging programmes.
Open plant & sanitation
Connect external cleaning and post-clean sanitation to the actual production environment.
Technical documentation
Request Product Documentation Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Brewery Hygiene Review Request Brewery Hygiene Review
Share the process area, cleaning challenge and current operating context with Everklin.