Bottle Washing Solutions
Returnable containers need a washer programme matched to container soil, bath condition, temperature and the final rinse.
Conveyor Chain Lubricants
CONVEXA SD
INDUSTRIAL GRADE EFFECTIVE LUBRICATION REDUCES WEAR EXTENDS EQUIPMENT PROCESS & FRICTION LIFE SAFE PRODUCT INFORMATION - Semi dry lubricant film provides long lasting protection - Minimizes wear and friction in low moisture conditions - Suitable for partial drying conveyor environments - Helps maintain smooth operation and reduces downtime
Operating / process challenges
Different brewery zones need distinct hygiene programmes.
Everklin Living Process Platform
Brewery and beverage hygiene process
Inspect the connected route from brewhouse and fermentation through CIP, bottle washing, filling, conveyor movement, packaging and open-plant hygiene.
System overviewClosed-process cleaning across tanks and pipe circuits
Select any numbered process point to inspect its operating challenge and treatment context.
Process stages
Monitoring referencesNo live plant values are shown.
CIP ConcentrationReturn TemperatureReturn ConductivityBottle Washer ConditionConveyor ConditionSanitizer Contact Time
+1 more
Foam Condition
Choose by task + product workspace
Choose the product for the active process.
The category brief and relevant products stay together. Select a product to open its compact summary and technical tabs.
CONVEXA SD
Conveyor Chain Lubricants
CONVEXA SD
Semi Dry Type Designed for Low Moisture ApplicationsINDUSTRIAL GRADE EFFECTIVE LUBRICATION REDUCES WEAR EXTENDS EQUIPMENT PROCESS & FRICTION LIFE SAFE PRODUCT INFORMATION - Semi dry lubricant film provides long lasting protection - Minimizes wear and friction in low moisture conditions - Suitable for partial drying conveyor environments - Helps maintain smooth operation and reduces downtime
Used forVerified compatible surfaces/equipment
- Primary application
- Verified compatible surfaces/equipment
- Process / cleaning stage
- Conveyor Chain Lubricants
- Target soil / requirement
- Friction, unstable pack movement, wear and unwanted line foam
- Application method
- Follow approved site procedure and current technical guidance
- Product role
- Semi Dry Type Designed for Low Moisture Applications
- Commercial pack
- 25 L
Selected product
Product Overview
Technical Information
At a glance
Semi-Dry Conveyor Lubricant is positioned within Everklin's Brewery / Beverage / Food / Dairy / Snacks portfolio for professional cleaning / process support. Selection should be based on the actual soil or process condition, surface/equipment compatibility, application method and the approved site procedure rather than product name alone.
Use this route when the operating requirement matches professional cleaning / process support and the observed condition is consistent with application-specific soil or operating requirement.
Semi Dry Type Designed for Low Moisture Applications
Conveyor Chain Lubricants
Use this route when the operating requirement matches professional cleaning / process support and the observed condition is consistent with application-specific soil or operating requirement.
Follow approved site procedure and current technical guidance
Friction, unstable pack movement, wear and unwanted line foam
Verified compatible surfaces/equipment
Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
25 L
Problems this product can help address
- Application-specific soil or operating requirement
- Product
- CONVEXA SD
- Chemistry / format
- Conveyor lubricant
- Application
- Follow approved site procedure and current technical guidance
- Technical values
- Refer to the current approved TDS
Benefits & applications
Applications
- Verified compatible surfaces/equipment
- Bottle, PET and can conveyor lines
- Packaging transfer sections
- Accumulation and high-speed line zones
How the result should be verified
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
How to use
Final values remain subject to the current Everklin TDS and site validation.
Dilution / dosage / concentration
Concentration is process-specific. Establish from product role, soil, equipment, temperature, time and validation. Use current Everklin TDS/site SOP before production use.
- 01
Confirm the task, soil/process condition and target surface/equipment.
- 02
Review compatibility and the approved site/manufacturing procedure.
- 03
Prepare or dose the product only at the verified product-specific concentration.
- 04
Follow approved site procedure and current technical guidance
- 05
Control relevant dwell/contact, mechanical action, flow or wash-stage conditions.
- 06
Rinse, recover, flush or finish as required by the approved procedure.
- 07
Verify by visual/process inspection and the relevant operating endpoint. For hygiene applications, use the approved site verification method; for process cleaning, review rinse/return condition and process-specific indicators.
Technical properties
- Product type
- Semi Dry Type Designed for Low Moisture Applications
- Chemistry / format
- Conveyor lubricant
- Application method
- Metered conveyor application
- Exact measured properties
- Request current approved TDS / COA
Compatibility & safety
Compatible systems / materials
- Verify substrate/material compatibility before broad use. Do not mix with other chemicals unless an approved procedure explicitly permits it. Product-specific pH, density, actives, exact dilution, contact time, temperature and efficacy claims should only be published from current approved Everklin technical data.
- Approved conveyor materials
- Installed metering and application systems
Restrictions / where not to use
- Confirm conveyor, pack and lubricant compatibility
- Control application to avoid excess product or floor contamination
Safety snapshot
- Read the current SDS before handling, storage or use.
- Use the PPE and engineering controls required by the SDS and site risk assessment.
- Keep incompatible chemicals segregated and never mix products without written approval.
- Use trained personnel and the approved dosing / application equipment.
- Follow the site spill, first-aid, disposal and emergency procedure.
Packaging & documents
25 L
Store in the original closed container under the conditions stated in the current SDS and TDS. Keep segregated from incompatible materials.
Product questions
What problem does CONVEXA SD address?
Application-specific soil or operating requirement
Where can CONVEXA SD be used?
Verified compatible surfaces/equipment
How is CONVEXA SD applied?
Follow approved site procedure and current technical guidance
What dilution or dosage is required?
Concentration is process-specific. Establish from product role, soil, equipment, temperature, time and validation. Use current Everklin TDS/site SOP before production use.
Selection questions, answered clearly.
How should the right Everklin product be selected?
Start with the active process category, operating objective, soil or residue, materials and application method, then confirm the choice against current product documents.
Where are current dosage and technical values available?
Product-specific values are supplied through the current approved TDS and Everklin technical review.
Which documents should be reviewed before use?
Review the current PIS, TDS and SDS together with the approved site or manufacturing procedure.
Bottle Washing Solutions
Container-washing programmes for returnable bottles before filling.
- Process role
- Treats bottle preparation as a dedicated packaging hygiene operation.
- Where it fits
- Bottle or container washing equipment before the filling line.
- Operating objective
- Connect product selection to the washer, soil and current operating route.
- Typical zone
- Bottle / container washer
Selection considerations
- Washer and container context
- Observed soil and current process
- Current product documentation
Conveyor Chain Lubricants
Conveyor lubrication programmes for controlled movement through filling and packaging.
- Process role
- Supports line movement as a distinct operating programme within packaging hygiene.
- Where it fits
- Bottle, can, tray or pack transfer conveyors.
- Operating objective
- Match the lubrication approach to the installed conveyor and operating conditions.
- Typical zone
- Transfer and packaging conveyor
Selection considerations
- Conveyor material and line layout
- Current operating and cleaning routine
- Application method and site procedure
CIP Cleaning Solutions
Closed-process cleaning programmes for tanks, lines and connected process equipment.
- Process role
- Supports structured cleaning of product-contact circuits without treating open plant as part of the same task.
- Where it fits
- CIP station, process vessels, transfer lines and filling circuits.
- Operating objective
- Connect the cleaning sequence to the actual equipment route and operating context.
- Typical zone
- Closed process equipment and CIP return
Selection considerations
- Equipment and circuit configuration
- Soil and process condition
- Cleaning method, temperature and contact time
Disinfectants & Sanitation
Sanitisation programmes for cleaned processing and hygiene-critical surfaces.
- Process role
- Supports the post-clean hygiene step within the approved site procedure.
- Where it fits
- Relevant cleaned surfaces, filling areas and process environment.
- Operating objective
- Connect sanitisation to the preceding cleaning step and intended hygiene zone.
- Typical zone
- Cleaned processing and filling environment
Selection considerations
- Surface and application context
- Pre-cleaning and site procedure
- Current product documentation
Open Plant Cleaning (OPC)
Open-plant cleaning programmes for external equipment, floors and exposed production areas.
- Process role
- Keeps open-surface cleaning separate from closed-process CIP.
- Where it fits
- Machine exteriors, floors, drains and surrounding production areas.
- Operating objective
- Build a controlled cleaning route around the actual open-plant soil and surface.
- Typical zone
- Open production environment
Selection considerations
- Surface and soil condition
- Cleaning method and available contact time
- Site procedure and rinse context
Foam Control
Foam-control support for relevant process or cleaning conditions.
- Process role
- Addresses unwanted foam as a separate operating consideration.
- Where it fits
- The relevant process or cleaning-support point after technical review.
- Operating objective
- Connect foam-control selection to the observed operating context.
- Typical zone
- Process or cleaning foam-control point
Selection considerations
- Observed foam source
- Process and application context
- Current technical documentation
Application context
Keep process, packaging and open plant connected.
Process equipment & CIP
Map cleaning decisions to tanks, pipe circuits, fillers and the installed CIP route.
Packaging & conveyor hygiene
Review container washing and conveyor lubrication as separate packaging programmes.
Open plant & sanitation
Connect external cleaning and post-clean sanitation to the actual production environment.
Technical documentation
View Document Library Technical Documentation
Select an Everklin product to request its current technical documentation.
Technical review
Request Technical Review Request Brewery Hygiene Review
Share the process area, cleaning challenge and current operating context with Everklin.